Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: shawsofhell on May 03, 2004, 05:37:58 AM

Title: Pedal Controller
Post by: shawsofhell on May 03, 2004, 05:37:58 AM
Hi, I was wondering if anyone could point me in the direction of some schematics to build a pedal controller capable of contolling at least 10 pedals and able to have at least 20 programs.

Cheers!
Title: Pedal Controller
Post by: el duderino on May 03, 2004, 07:30:18 AM
Hey I saw exactly what your looking for its the GIG RIG
search for the site if you dont know about it allready im
sure somewhere would have a rip off schematic though :!: ...........

probly better of gettin a schematic as this thing cost about 695£ sterling!! :cry:

hope this helps,
eamonn
Title: Pedal Controller
Post by: R.G. on May 03, 2004, 11:16:06 AM
Have you read GEO?
Title: GEo
Post by: Lonestarjohnny on May 03, 2004, 12:05:23 PM
if he Has'nt, He soon will RG,
JD
Title: Pedal Controller
Post by: shawsofhell on May 05, 2004, 02:11:54 AM
I've read the "Programmable FX Switcher with Amp Controls" article previously but this sort of method doesn't seem suitable for what I want. For starters I'm going to need to have 200 diodes just in the section where you seect which relay will be active with each program. Any other methods suggested that could make this a whole lot easier?
Text only | Text with Images