Im thinking one of my problems may be with the offboard wiring...
i did a search for problems and i saw there was some confusion with the input etc etc...
im thinking this may be one of my (many) problems...
does anyone have a picture or diagram?
thanks
-sic
Regarding the input wiring, run a wire from the point on the board marked "Sensitivity Lug 3 and Input" to lug 3 of the 100k-B Sensitivity pot. Then connect that same lug to the circuit input lug of the bypass switch.
What other specific questions do you have about the wiring? All the information should be there within the schematic and perf layout, but I can help with clearing up the details.