I've been trying to get this thing to fit in a BB box, but i was having a lot of the problems with the height of the large caps i am using. so i laid them down on their sides. :D
the underside of the board is even more cramped. i put pins on the board (hard to see but they are there) for measuring the bias voltage on Q2 and Q3.
(http://subdecay.com/sundriveboard.gif)
measurements of the board are 2 x 1.5"
oh, and thanks for the .22uf caps RDV
Is there a schematic available for the circuit?
What is this circuit? I never heard about it.
it is just another overdrive. uses 3 mpf102's. one is just a buffer.
I dont have a schematic file, just on paper. it is an original design of mine. I came up with the basic idea back in febuary or march, and this is actually a stripped down version. the original had too much gain, and was just too mushy.
If i ever get the time to draw up a schematic on my computer, i will post it.
Quote from: Brian Marshalloh, and thanks for the .22uf caps RDV
I couldn't be prouder! :cry:
The pic's stretched a little lengthwise isn't it? Makes the cap look taller than it is long.
RDV
i took it at an angle, so im sure it is distorted a little.
Looks cool. If you want, do a quick and dirty draw of it or scan the schematic and send to me, then I redraw it for you.
i have it on paper, but half of it is wrong, or at least not the way i am building it now.
I'll get to it eventually, but im really busy right now.
Looks good Brian.