DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: sir_modulus on May 24, 2004, 07:25:09 PM

Title: OT: Need help with this ZEN amp schematic. Please help.
Post by: sir_modulus on May 24, 2004, 07:25:09 PM
First off, what does R mean, as in 100R (i guess 100 Ohms)? Next off what voltage can i use for capacitors, and what wattage for resistors. Finally, it says C3 is offboard and not shown, and in the older chematic above, it is the output cap. Is is on the output still :?

I know this is a lot, but if someone could help me it would be very much apreciated. THANKS!!! :D

LM 250+
Title: CR@@@@@@@@@@@P
Post by: sir_modulus on May 24, 2004, 07:26:13 PM
I forgot to post the schematic!!!!!!!! How STUPID of me:

http://www.sound.westhost.com/project36.htm
Figure 5
Title: I
Post by: petemoore on May 24, 2004, 08:06:49 PM
I would use at least 50v+ caps, [the schematic says 40v supply, good to be on the safe side there], and 1/2 watt resistors.
Title: OT: Need help with this ZEN amp schematic. Please help.
Post by: sir_modulus on May 24, 2004, 10:13:06 PM
thanks