Print Page - phase 100 question

Title: phase 100 question
Post by: soundcollage on May 28, 2004, 03:40:13 PM

When using the GGG layout of the phase 100, does the flat (printed side) of the vtl5c3/2 face (up or towards the board)?

Title: phase 100
Post by: u1061810 on May 28, 2004, 05:33:59 PM

Hi,
It faces up. You can see the lettering from the top of the board.
Another thing with that lay-out, the rotary switch is wired backwards, so just switch the two center pole connections.

Title: phase 100 question
Post by: soundcollage on May 28, 2004, 05:58:09 PM

Thanx for the quick reply. I am using Mark's 5 knob mod so I don't have to worry about the rotary switch.

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: soundcollage on May 28, 2004, 03:40:13 PM