DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: MSR on June 02, 2004, 12:03:08 PM

Title: Simple Line selector
Post by: MSR on June 02, 2004, 12:03:08 PM
Hi guys
I'm just about to start a new project making a line selector with LED's.
Wiring diagram (http://www.monkeysincurry.20m.com/images/signalswitch2.gif)
This is a quick wiring diagram i drew up
Does everything look ok?

Thanks for looking
Mike
Title: Simple Line selector
Post by: AL on June 02, 2004, 12:13:08 PM
What is your power supply? 9V? If so you'll need a limiting resistor in there so you don't fry your LED's. Here's some good info for that

http://www.caving.org.uk/gear/led/wiring.html

AL
Title: Simple Line selector
Post by: MSR on June 02, 2004, 12:25:00 PM
Cheers
I'll get it sorted when i buy all the parts, still in the planning stages at the mo