DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: dolhop on August 20, 2004, 10:02:36 PM

Title: DOD fx56 American Metal schematic now available!
Post by: dolhop on August 20, 2004, 10:02:36 PM
I have posted the schematic for the DOD fx56 American Metal on my site for anyone interested.  

http://bcsixty.tripod.com/fx56/

I also have posted the schematic for the Ibanez Metal Screamer MSL pedal which I traced out last month.

Enjoy.
Title: DOD fx56 American Metal schematic now available!
Post by: Gilles C on August 21, 2004, 02:46:37 AM
Haha! did I see a J113 FET for the switching there...?  :P

Thanks

Gilles
Title: DOD fx56 American Metal schematic now available!
Post by: Zero the hero on August 21, 2004, 04:57:27 AM
Thanks for sharing!
Title: DOD fx56 American Metal schematic now available!
Post by: cd on August 21, 2004, 09:15:47 AM
Funny, the gain stages and clipping setup on the FX56 is very, very similar to a boutique pedal that people rave over.  Should be a good candidate for mods.
Title: DOD fx56 American Metal schematic now available!
Post by: dolhop on August 21, 2004, 10:48:22 AM
Which boutique pedal is that?
Title: .
Post by: petemoore on August 21, 2004, 11:42:05 AM
Very interesting, that one opamp sure has it's share of diodes!!
Title: DOD fx56 American Metal schematic now available!
Post by: WGTP on August 21, 2004, 12:00:46 PM
It is a clone of the Boss Heavy Metal Pedal.  Same op-amp clipping diode layout  I have an old Dod pedal labeled something else that has American Metal on the circuit board.   8)
Title: DOD fx56 American Metal schematic now available!
Post by: Peter Snowberg on August 21, 2004, 12:42:06 PM
I've got an HM-2 and thought that clipper looked very similar to the schemaic I remember. :D

It's not my favorite guitar sound, but try running a Hammond B3 through one and then into a Leslie!  :shock:  8)  :twisted: It nails some amazing classic B3 grinds and sound like a musical power tool.

Does this mean there's a boutique HM-2 out there?

Note to builders, try removing the active EQ (U2 & U3) and replacing it with a Marshall tonestack. ;)
Title: DOD fx56 American Metal schematic now available!
Post by: cd on August 21, 2004, 01:52:04 PM
Notice I didn't mention the pedal in the first place :)  My intention was to give some props to DOD and to suggest a good cheap pedal for mods.  Combine some of the ideas at Jack Orman's site and RG Keen's site and you'll have a very nice pedal.
Title: DOD fx56 American Metal schematic now available!
Post by: dolhop on August 21, 2004, 02:16:16 PM
I wasn't that impressed with the sound and so I sold the pedal - but since I'd never seen the schematic on the web I figured others could benefit from it.  Maybe Aron will add it to his collection of schematics (along with the Metal Screamer).

As for resuing circuitboards - that is a very common thing to do with pedals - it saves the company a lot of money to reuse the PCB design since many of the pedals are identical other than a few component changes.  Take the metal screamer for example - EXACTLY the same as the TS-10 tube screamer except for the tone capacitor value.  

I was modding my FX53 classic tube pedal yesterday and the board says FX50B on it (but they actually crossed out the 50B with a marker and wrote FX53!).  Same pedal just different components.  I removed the tone section and changed it to a wet/dry blend (so my bass player can use it).
Title: DOD fx56 American Metal schematic now available!
Post by: MartyMart on August 21, 2004, 05:09:30 PM
Thanks Dolhop, nice schem!
Marty. :D
Title: DOD fx56 American Metal schematic now available!
Post by: Transmogrifox on August 22, 2004, 02:19:02 AM
I've seen this schem somewhere else.  There's something wrong in the EQ section.  The lows on my American metal pedal are adjustable...maybe it's a feature they added to later designs?  It would be a very simple thing to do.
Title: DOD fx56 American Metal schematic now available!
Post by: dolhop on August 22, 2004, 03:02:01 AM
Quote from: TransmogrifoxI've seen this schem somewhere else.  There's something wrong in the EQ section.  The lows on my American metal pedal are adjustable...maybe it's a feature they added to later designs?  It would be a very simple thing to do.

You must have the FX56-B Super American Metal - same purple colour - and basically the same pedal other than the added bass knob/control.
Title: DOD fx56 American Metal schematic now available!
Post by: Transmogrifox on August 22, 2004, 03:14:00 AM
That's it!  Thanks for clarifying, dolhop.  There's the difference--I do have the FX56-B super american metal.
Title: DOD fx56 American Metal schematic now available!
Post by: p1_ind on August 23, 2004, 06:46:23 PM
I have one of these pedals and was wondering
how is the best way to add a mid control and a bass control
as this unit has a huge low end.

Adam
Title: DOD fx56 American Metal schematic now available!
Post by: guitarhacknoise on August 24, 2004, 02:21:47 AM
Thanks dolhop!
busted that a.m. monkey out of 'er peaceful slumber at the bottom of a milk crate, ain't used it since the 'ol hardcore days. little contact cleaner to get the beer out of there ( beer and pot are a bad combo). placed her on the project shelf, now all I have to do is get to every thing that landed on that plank before the "amer-etal" ,fixed, done, returned, given-away, or just plain thrown out!
maybe it's time for that vacation.
-matthias
Title: ...
Post by: GreenEye on August 24, 2004, 08:28:03 PM
I never met a DOD pedal I liked.
Title: DOD fx56 American Metal schematic now available!
Post by: dolhop on August 24, 2004, 09:20:31 PM
The distortions are usually lacking, but some of the modulation effects can be useful.  However, DOD pedals are well built and IMO have a better, more functional shape than the boss/ibanez type of pedal.  If you're into making your own pedals, the DOD chassis are great if you can get them cheap.
Title: really?
Post by: GreenEye on August 25, 2004, 10:12:03 AM
I thought DOD pedals were known for their bad foot switches.  The black plastic ones that turn on and off when you breathe on 'em.  Don't those things break all the time?  At any rate, their shape is rather nice.  Compact.  And I like the battery access.
Title: DOD fx56 American Metal schematic now available!
Post by: dolhop on August 25, 2004, 10:20:48 AM
I've never had switch trouble, but I could see it being a problem.
Title: Re: DOD fx56 American Metal schematic now available!
Post by: Dirk_Hendrik on August 25, 2004, 11:18:02 AM
Quote from: dolhop
I also have posted the schematic for the Ibanez Metal Screamer MSL pedal which I traced out last month.
Enjoy.

Allow me for beiing negative. You've spent a lot of time on tracing a circuit wich, minus a few alterations, is a plain tubescreamer :wink:
Title: DOD fx56 American Metal schematic now available!
Post by: dolhop on August 25, 2004, 11:59:14 AM
Unfortunately I did spend a few hours on it - but nobody (including myself) would have know that it was similar unless SOMEBODY traced it.  Tubescreamers are selling for hundreds of dollars and metal screamers selling for tens of dollars - I'm sure there will be many grateful people out there (unlike yourself) that can buy a cheap metal screamer and turn it into a TS-808 type of pedal.
Title: DOD fx56 American Metal schematic now available!
Post by: strungout on August 25, 2004, 04:04:32 PM
Cool, and thnx for doing the work and sharing.