DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: MartyMart on September 02, 2004, 06:51:52 AM

Title: A useful perfboard tip pehaps??
Post by: MartyMart on September 02, 2004, 06:51:52 AM
This may be very obvious, so excuse me if it is, but i needed a way of "collecting" wire runs together on perf board builds, ie: joining 3 ground wires at the board.
I just took a staple from my staple gun, pushed it through 3-4 perf hole spaces and bent it together on the other side ! makes soldering several wires a breeze and also works well as a "joiner" for two pot lugs.

Well i thought it was quite cool anyway........!!
Cheers,
Marty. :)
Title: A useful perfboard tip pehaps??
Post by: onboard on September 02, 2004, 04:33:25 PM
Cool thinking! I've always used leads clipped off parts to make jumpers/busses. But the staple idea is handier, I think, since you can always keep a row of'em around and not worry about keeping track of clipped off ends.

Do they take solder easily?