Print Page - Parts question for Mouser

Title: Parts question for Mouser
Post by: wef200 on September 13, 2004, 03:06:40 PM

Can anyone give some advice on a few part numbers for mouser.

I am building a fuzz pedal and I need to order some 'High End roll-off" caps for the rocket fuzz schematic. It calls for a .1uf, I believe the High end roll off... means that it has a very high Q rating, is this correct? Im not quite sure which capacitors will work best from mouser?

Thanks for the help

Title: Parts question for Mouser
Post by: aron on September 13, 2004, 06:04:36 PM

Any .1uF cap will work. You can use any film type 16V or higher.

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: wef200 on September 13, 2004, 03:06:40 PM