Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: skiraly017 on January 14, 2007, 03:51:42 PM

Title: Increasing the bass on a Tone Bender clone.
Post by: skiraly017 on January 14, 2007, 03:51:42 PM
Do I change the 0.01uF input cap or the 0.01uF on the tone control to a bigger value? Thanks.
Title: Re: Increasing the bass on a Tone Bender clone.
Post by: vanessa on January 14, 2007, 04:49:17 PM
Sorry I thought it was a tube screamer thread...

:icon_wink:
Title: Re: Increasing the bass on a Tone Bender clone.
Post by: bluesdevil on January 15, 2007, 04:14:34 AM
On the 2 knobber mkII pro Tonebender I built, increasing the output cap to .1uf did it for me. Also liked a .001uf cap across the outer lugs of the volume to smooth out the high end sizzle.
Text only | Text with Images