Close-up.
Ungooped.
Fresh:
input-section (http://img.photobucket.com/albums/v442/lectronix/pix%20hidden/hdin2033.jpg),
central normal/strong mode select (http://img.photobucket.com/albums/v442/lectronix/pix%20hidden/hdswi2035.jpg),
elevated bypass circuitry (http://img.photobucket.com/albums/v442/lectronix/pix%20hidden/hdbyp2034.jpg),
output-section (http://img.photobucket.com/albums/v442/lectronix/pix%20hidden/hdout2032.jpg),
general top-view (http://img.photobucket.com/albums/v442/lectronix/pix%20hidden/hdtop2036.jpg).
(click linx to view pix...)
Old news, Behringer has cloned it allready...
Looking at the circuit It's actually in every stomp box that they have in current production,
only the "elevated bypass" is implemented differently. ;)
is this frustation speaking through a bunch of links?
Quote from: zjokka on April 01, 2007, 04:25:51 AM
is this frustation speaking through a bunch of links?
Or is it a sense of humor? :icon_mrgreen:
it`s for those who don`t wanna buy "expensive" new pedals, but rather revenge-eneer by re-tracing from photos... :icon_wink:
(additionally to the thread about this mystery pedal: http://www.diystompboxes.com/smfforum/index.php?topic=52455.0)
Quote from: black mariah on April 01, 2007, 04:33:10 AM
Quote from: zjokka on April 01, 2007, 04:25:51 AM
is this frustation speaking through a bunch of links?
Or is it a sense of humor? :icon_mrgreen:
or too much beer...
I just couldn't waste my time on a forum where I have nothing to learn or to contribute
I like it........
You made my day!
Quote from: zjokka on April 01, 2007, 04:40:03 AM
Quote from: black mariah on April 01, 2007, 04:33:10 AM
Quote from: zjokka on April 01, 2007, 04:25:51 AM
is this frustation speaking through a bunch of links?
Or is it a sense of humor? :icon_mrgreen:
or too much beer...
I just couldn't waste my time on a forum where I have nothing to learn or to contribute
...probably that 2nd beer yesterday evening indeed was too much :icon_razz:
BTW: it`s been said that the clocks go different in Bavaria...
but it`s sunday in beerland as well as in tulipland, so I see no harm in posting a little something
after a hard week`s work before going to church, later on.
No, it´s obvious: you forgot only the date.
April, April ! ;D
analogguru
see last pic-link :icon_wink: :icon_razz:
I am only confused, why I cannot find a gut-shot for the HUMmel-Debugger (http://www.abracadabrasuperstore.com/images/leg%20avenue%20costumes/animal/images/bumble%20bee%20one%20piece%20stinger_jpg.jpg) ?
The stripes are nearly the same...
analogguru
Quote from: analogguru on April 01, 2007, 05:45:43 AM
I am only confused, why I cannot find a gut-shot for the HUMmel-Debugger (http://www.abracadabrasuperstore.com/images/leg%20avenue%20costumes/animal/images/bumble%20bee%20one%20piece%20stinger_jpg.jpg) ?
analogguru
That picture contains a MUCH more interesting circuit BTW :icon_wink:
got any close ups of the input socket, fnarr fnarr ;D
Thanks, the true bypass part is definately copyable and usable, although anychance of seeing the full circuit? ;)
I get it...!
haven`t tried it for de-humming the Tube-Bumble-Bee (http://www.youtube.com/watch?v=DkPnzO96eGE) yet...
(watch out: large youtoob-file!)
:icon_biggrin:
so I was lucky to attend the very last concert of the old organ
(http://img.photobucket.com/albums/v437/latronax/steforgold0037.jpg)
(which my brother-in-law played...), in the 999 year old St. Stephan`s church in Bamberg/Germany:
(http://img.photobucket.com/albums/v437/latronax/ststefan0039.jpg)
on APRIL 1st 2007,
and hopefully will be as lucky when it comes to the very first concert of the new organ around easter time
next year...
(yes the old one had quite a bad signal/noise ratio, a lot of popping, wind-hiss,
and audibly is in need of some serious de-bugging - it still was tuned well, though,
which was especially neccessary with the heaviest number: Dieter Schmeel`s 1961 composition
"Introduction/Canon/Toccata", which comes almost next to playing with both forearms&elbows
supported by heavy tripling pedalwork...).
:icon_smile:
puretube,
i thought, he ALWAYS does this, but no,
you got me last year too (http://www.diystompboxes.com/smfforum/index.php?topic=43871.msg318039#msg318039)
;D
Ton, I'm so disappointed that you didn't get the old organs schematic before it
was "retired" :icon_frown:
Will the new one be a Behringer , by any chance .... :icon_mrgreen:
Oh, and I'm glad that these organs use " Valves " but NEVER Tubes !!!!
On a side note, just ordered some 1SH18B Russian mini valves for low voltage valve
fun :D
......... any "tips" Ton ??
MM.
Quote from: MartyMart on April 02, 2007, 04:19:05 AM
On a side note, just ordered some 1SH18B Russian mini valves for low voltage valve
fun :D
Everyone know these russian minitubes (http://www.keyboardpartner.de/hammond/diagrams/MIG-T/1j17-29b_data.pdf) are good for nothing ;D , especially inappropriate for an overdrive/distortion preamp ciruit (http://www.keyboardpartner.de/hammond/diagrams/MIG-T/mig-t_diagram.pdf) and sound terribly microphonic (http://www.keyboardpartner.de/hammond/t-mod-tubepreamp.mp3)
just hope the rest of the board doesn't find out how bad they are ;)
Zjokka , you're a " star " :icon_wink:
I have 6 of them NOS on the way from minifux1 !!
LOVE that Hammond grind, how much change required for gtr input ??
Marty.
Quote from: MartyMart on April 02, 2007, 08:07:08 AM
LOVE that Hammond grind, how much change required for gtr input ??
I would change nothing for starters, maybe put a fendery input cap?. The schematic has two inputs (for lower an upper manual)
You can get as many 1SH28s as you like from conrad.de -- there were previous threads on this (http://www.diystompboxes.com/smfforum/index.php?topic=6825.0) and also this one previous threads on this (http://www.diystompboxes.com/smfforum/index.php?topic=6825.0) and even some experiments by slajeune (http://www.diystompboxes.com/smfforum/index.php?topic=22488.0)
haven't tried it myself though.
no gut shot? pffft!
could you show more pic about the humdebugger?how about the circuit board,very interested :icon_wink:
what the hell are those pics........ are you kidding us???? :icon_evil:
Quote from: Gila_Crisis on January 18, 2008, 02:08:51 PM
what the hell are those pics........ are you kidding us???? :icon_evil:
If you read the through the thread you'll notice it was done on April 1st. So yes, he was kidding us.
(http://i264.photobucket.com/albums/ii167/kuguali/2.jpg)
That's an Analog Devices BlackFin DSP chip there on the lower right corner. Can't make out the exact part number though...
-- T. G. --