Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: dirk on May 07, 2007, 07:22:18 AM

Title: Synths: Converting V/oct control voltage to a Hz/V control voltage.
Post by: dirk on May 07, 2007, 07:22:18 AM
Hello people,

I'm looking for a way to convert a (normal) V/oct control voltage into a (unusual) Hz/V control voltage.

Does anyone know how this can be done?

Thanks in advance and greetings Dirk.
Title: Re: Synths: Converting V/oct control voltage to a Hz/V control voltage.
Post by: Joe Viau on May 07, 2007, 09:08:51 AM
Hello, Dirk:

http://www.paia.com/midi2cv.asp

PAiA has been around for a long time.  Some people love them, others don't.  They have the midi2cv8 product plus an add-on board
that will do Hz/V.  The midi2cv8 plus the add-on board will run you $121.80 USD.  You can add a hardware / front panel kit for an
additional $29.45 USD.  It's all on the page cited above.  They also have a free firmware-for-life policy.

HTH,
Joe
Title: Re: Synths: Converting V/oct control voltage to a Hz/V control voltage.
Post by: Joe Kramer on May 07, 2007, 12:26:07 PM
Hey Dirk,

You might want to try hanging around here:

http://electro-music.com/forum/

Regards,
Joe
Title: Re: Synths: Converting V/oct control voltage to a Hz/V control voltage.
Post by: Dan N on May 07, 2007, 05:01:37 PM
Looks DIYable:

http://www.cykong.com/Synths/Korg%20MS-02/KorgMS-02.htm
Title: Re: Synths: Converting V/oct control voltage to a Hz/V control voltage.
Post by: Paul Perry (Frostwave) on May 07, 2007, 11:44:10 PM
Quote from: Joe Kramer on May 07, 2007, 12:26:07 PM
Hey Dirk,
You might want to try hanging around here:
http://electro-music.com/forum/

Or here http://dropmix.xs4all.nl/mailman/listinfo/synth-diy where I hang around!
Text only | Text with Images