Print Page - Drill template for the 1590b?

Title: Drill template for the 1590b?
Post by: marcoharder on December 31, 2007, 01:35:11 PM

Where can i find a good drill template for this casing? Thanks!

Title: Re: Drill template for the 1590b?
Post by: Pushtone on January 02, 2008, 02:07:20 PM

Check this thread.
http://www.diystompboxes.com/smfforum/index.php?topic=60231.0

I put some here (http://www3.telus.net/david65/pedal-pics/drill-template/) too.
But you will need graphic software to edit it.

Good Luck

Title: Re: Drill template for the 1590b?
Post by: qwixzh on January 02, 2008, 08:49:37 PM

hi marco!

what are you planning to build?

qwi

Title: Re: Drill template for the 1590b?
Post by: arma61 on January 05, 2008, 03:07:41 AM

Hi all,

Quote from: Pushtone on January 02, 2008, 02:07:20 PM

I put some here (http://www3.telus.net/david65/pedal-pics/drill-template/) too.
But you will need graphic software to edit it.

Pushtone, which graphic software should I use to edit it ?
Thx vm
Armando

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: marcoharder on December 31, 2007, 01:35:11 PM