first off.. my layout SUCKS hard. I'm sorry
My friend gave me this pedal and i could find no info on it.... so here is something for you guys to play with ... #6 pedal made 3-08-07
also i numbered the lugs on pots looking at them in box.... 1 being left and 3 being right..
I will also admit that tracing the components with all the glue was a bitch.... so some things may be off....
If this post is a NO-NO then please delete or ignore it...
Alot of education is needed here, hahah
(http://i75.photobucket.com/albums/i281/shelldg22/DSCN5991.jpg)
(http://i75.photobucket.com/albums/i281/shelldg22/DSCN5992.jpg)
(http://i75.photobucket.com/albums/i281/shelldg22/DSCN5993.jpg)
i've been thinking about covering my copper traces with solder but had never seen it done before, until now. at least where i mount the 3pdt switch. thanks for posting this idea (:
not that i care, but it could be seen as a no-no. it seems like what you have done is just directly copied the PCB layout for the board. or am i wrong? since the image is artwork you'd be breaching copyright. it looks like a really simple effect. the best thing for you to do would be to look at the board and work out a schematic from it, then use your schematic to make your own layout. personally if i wanted just one for myself, or for a friend then i'd do exactly what you have done though, assuming i liked the layout (:
people don't seem to care as much if you post a schematic also. i think it's because they think you have to be experienced enough to make your own layout on vero/pcb etc. and you deserve to be able to copy it a bit more, or something.
cool (: