I seem to be gathering quite a few tools now and I think it's time to bring them together and get a toolbox. I've been searching and there's not a lot on tools around here and I just wondered what you guys consider essential tools?
You know what it's like if I get a tool box I'll want to pad it out! ;)
Currently I have...
multimeter
mini side cutters
mini normal plier things
soldering iron
croc clips
IC extractor
Calculator
I borrow my dads...
Drill
Screw drivers
Files
Stanley knife
I think thats the lot.
Does anyone use these wire striper things?
"http://images.google.co.uk/images?sourceid=navclient&ie=UTF-8&rlz=1T4GGLR_enGB245GB245&q=wire+strippers&um=1&sa=N&tab=wi"
Are they worth getting? I've always just used sidecuters.
I don't think I could live with out it.
(http://www3.telus.net/david65/pedal-pics/Mini-Drill-Parts.jpg)
I use it for some many things.
Got it from Radio Shack (online)
QuoteInsert Quote
I don't think I could live with out it.
I use it for some many things.
Got it from Radio Shack (online)
What is it? A non-electric drill? (one of those push down to operate ones)
Yeah, get some simple wire strippers, you'll be glad you did.
The drill is called a pin vise. It's not the kind you push down on to operate, you just spin the whole thing between your fingers. It's great for making pcb holes bigger when you suddenly realize that your diodes have reaaaaly fat leads.
Quote from: jefe on April 16, 2008, 06:19:29 PM
The drill is called a pin vise. It's not the kind you push down on to operate, you just spin the whole thing between your fingers. It's great for making pcb holes bigger when you suddenly realize that your diodes have reaaaaly fat leads.
And it is the best thing in the universe for cutting stripboard traces. If it will take a large enough drill bit.
one of my faves is an "automatic" center punch. mark hammer once mentioned these in a thread. they are spring loaded and make a nice dimple in a pcb for drilling holes. you place the tip of the punch in the appropriate spot and press. it makes an accurate mark.
(http://gaussmarkov.net/images/snaponpunch.JPG)
this one is from snapon, which makes quality stuff.
another item i like is hex nut drivers. they make tightening and loosening pots and jacks very easy.
Another good one that I recently picked up was a bicycle dumbell wrench, on a tip from this (http://www.diystompboxes.com/smfforum/index.php?topic=65753.0) thread.
(http://www.tooled-up.com/ShowImage.aspx?Type=3&File=59292.jpg&Man=DRA&Size=200&Save=0)
Fits all those jacks & pots, and most switches. I paid $2.99 with a cheap tire repair kit.
Completely offtopic for the forum but somewhat ontopic for the thread (technically it is a tool). I bought this today:
http://www.leevalley.com/garden/page.aspx?c=1&p=59411&cat=52&ap=1
Can you tell where my mind is lately? :icon_biggrin:
QuoteInsert Quote
I don't think I could live with out it.
(http://www3.telus.net/david65/pedal-pics/Mini-Drill-Parts.jpg)
I use it for some many things.
Got it from Radio Shack (online)
Quote from: demonstar on April 16, 2008, 06:14:34 PM
What is it? A non-electric drill? (one of those push down to operate ones)
Sorry for the terse reply, have more time now.
Just a mini hand drill you twist yourself.
There's a chuck at one end and it holds an assortment of bits in the handle.
Good for probing (I clip my meter to it with an alligator clip),
Good for cutting traces. Good for missed pads.
The bits are sized for PCB and have come in very handy when if I come upon a pad I missed on the drill press.
Who wants to put their half populated PCB on the press for a missed pad.
But most of the time I have the sharpened pointer/scratcher bit on.
Its hard steel, sharpened point. Very handy tool.
Sadly the RS web site does not list it anymore, but I found similar hand drills with bits for PCBs on UK sites.
But no sharpened pointer, dam, thats the sweetest plum! I wonder if Steve could source this one???
Quote from: jefe on April 16, 2008, 09:23:28 PM
Another good one that I recently picked up was a bicycle dumbell wrench, on a tip from this (http://www.diystompboxes.com/smfforum/index.php?topic=65753.0) thread.
(http://www.tooled-up.com/ShowImage.aspx?Type=3&File=59292.jpg&Man=DRA&Size=200&Save=0)
Fits all those jacks & pots, and most switches. I paid $2.99 with a cheap tire repair kit.
+1.
I read that thread too and got one. Really useful!
Wow, I'll keep my eyes open for them things when I'm out and about. Ever since I first saw all the tools lined up in the shop I've been fascinated looking through them ever since. ::)
A thing I found was instead of those expensive "third hand" holder things, I just got a washing peg and nailed it to a little wooden block and I was away.
Not sure if it would fit but couldn't you scavenge the pointer out of a cheap compass "(think drawing circles" compass not "where is north") although that may not be maded of a hard material.
Quote from: Pushtone on April 17, 2008, 02:23:56 AM
Sadly the RS web site does not list it anymore, but I found similar hand drills with bits for PCBs on UK sites.
But no sharpened pointer, dam, thats the sweetest plum! I wonder if Steve could source this one???
QuoteCompletely offtopic for the forum but somewhat ontopic for the thread (technically it is a tool). I bought this today:
http://www.leevalley.com/garden/page.aspx?c=1&p=59411&cat=52&ap=1
Can you tell where my mind is lately?
Ha ha, great idea!
Oe more thing I really must keep my eyes open for and O-scope. Better save up and keep checking ebay. those handheld ones look nice. :P
I use this automatic wire stripper:
http://www.radioshack.com/product/index.jsp?productId=2062787&cp=&sr=1&origkw=wire+stripper&kw=wire+stripper&parentPage=search
It's by far my favorite tool, and absolutely worth the $16. Stripping wires isnt exactly hard, but this just makes it SO easy.
Get strippers spring loaded when applicable:
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=92348
The Ideal brand strippers are good too, but don't offer the "fine tuning" of the one above. Also, the Ideals are better with the thicker handles.
Also these Plato side cutters are invaluable to me:
http://www.techspray.com/newinfo/Ergonomic%20Cutter%20Brochure%20PDF.pdf?bcsi_scan_4012CCBD6C63F55B=0&bcsi_scan_filename=Ergonomic%20Cutter%20Brochure%20PDF.pdf
Lastly the "third hand" soldering stand is literally that: an extra hand! I couldn't live without it.
i borrowed some of these from a friend and i really didnt want to give them back:
http://buy1.snapon.com/catalog/item.asp?P65=&tool=hand&item_ID=7206&group_ID=796&store=snapon-store&dir=catalog
Looks like I'll be getting some wire strippers. I'll double check my dad doesn't have some I can 'twock' first. :D
I wonder if harbur freight will ship to the U.K. because they are so cheap and seem to have such good deals especially with about $2 to the £1. I could get a fair few tools off them for not much. (exchange rate is good for brits but not so clever for the environment mind ;))
I remember from another "tools" thread, buddy fashioned himself a PCB vice (for soldering the board)
using two blocks of wood with a grove cut into one edge and a rubber band.
Brilliant!
http://www.diystompboxes.com/smfforum/index.php?topic=38598.0
Quote from: rikkards on April 16, 2008, 09:29:16 PM
Completely offtopic for the forum but somewhat ontopic for the thread (technically it is a tool). I bought this today:
http://www.leevalley.com/garden/page.aspx?c=1&p=59411&cat=52&ap=1
Can you tell where my mind is lately? :icon_biggrin:
Hey - they don't include the bag! What a deal-breaker......
:)
10 bags later, I can say it works. You really only need about 2-3 armfuls of leaves before you don't need it for that specific bag but it makes it a lot less of an annoyance. Now I need to get the lawn aerated. Sigh.
Quote from: Mick Bailey on April 18, 2008, 04:08:57 PM
Quote from: rikkards on April 16, 2008, 09:29:16 PM
Completely offtopic for the forum but somewhat ontopic for the thread (technically it is a tool). I bought this today:
http://www.leevalley.com/garden/page.aspx?c=1&p=59411&cat=52&ap=1
Can you tell where my mind is lately? :icon_biggrin:
Hey - they don't include the bag! What a deal-breaker......
Not really a tool but you need a loads of cable ties.
(http://jwproducts.co.uk/ties.gif)
QuoteNot really a tool but you need a loads of cable ties.
Ooooh I think I better get some of them. Might help me tidy my guts up a bit. Do you use these inside all your pedals Janne?
Quote from: demonstar on April 19, 2008, 06:19:02 AM
QuoteNot really a tool but you need a loads of cable ties.
Ooooh I think I better get some of them. Might help me tidy my guts up a bit. Do you use these inside all your pedals Janne?
I have recently used them in most of my pedals. They are also useful for making strain relief to the alligator clip end of the audio probe cable and other DIY adaptors.
Janne
And you can also use them monting small PCBs with these.
(http://www.nfauto.co.uk/images/june2004/cable_tie_base.jpg)
QuoteSadly the RS web site does not list it anymore, but I found similar hand drills with bits for PCBs on UK sites.
But no sharpened pointer, dam, thats the sweetest plum! I wonder if Steve could source this one???
Two places you can probably find one: a welding supply shop - they're used for cleaning welding tips - that's where I got mine; or a hobby shop, the kind that sells plastic model kits.
Quote from: rikkards on April 16, 2008, 09:29:16 PM
Completely offtopic for the forum but somewhat ontopic for the thread (technically it is a tool). I bought this today:
http://www.leevalley.com/garden/page.aspx?c=1&p=59411&cat=52&ap=1
Can you tell where my mind is lately? :icon_biggrin:
:icon_eek: I am now convinced there is a tool for
everything!
I have a tapered reamer that will take a 5mm hole out to something like 32mm, Not one of the stepped ones, just a fluted cone. I use this a lot for adjusting hole sizes, or for safer boring of larger holes in die-cast or aluminium boxes. Very useful.
This could come in handy for stompbox related stuff...
http://www.frets.com/FRETSPages/Machining/Products/JackTheGripper/jackthegripper.html (http://www.frets.com/FRETSPages/Machining/Products/JackTheGripper/jackthegripper.html)
(http://www.frets.com/FRETSPages/Machining/Products/JackTheGripper/jackthegripper06s.jpg)
(http://www.frets.com/FRETSPages/Machining/Products/JackTheGripper/jackthegripper01s.jpg)
QuoteThis could come in handy for stompbox related stuff...
http://www.frets.com/FRETSPages/Machining/Products/JackTheGripper/jackthegripper.html
That looks great. I would get one but by the time postage is on top I think it's over priced. One has gotta' way up if the cost is worth the need.