First, I wish I built this earlier. Seems to be able to get most of the fuzz sounds from 5-6 of the fuzz faces i've made before. And it works good with Wah.
I put it in a box that had 6 holes for knobs. Now I have 2 left and would like to see what I can add. I thought of a feedback loop and switch like BeavisAudio has for the BYOC Fuzz Face. Or at least a voltage sag.
Anything else worth adding?
How about a switch to toggle between a large and small input cap as on the schematic?
Or a rotary to switch between a few?
The Resistance between the 9v and the circuit should work fine.
john
It already has a Fat Switch and the two setting are fine. I was thinking of something I can make noise with.
you could add a booster circuit.
That's an idea though there's no room for another stomp switch. I haven't tried a separate boost with it yet.
Vary R9, as noted on the schematic.
Quote from: DougH on September 29, 2008, 09:39:54 AM
Vary R9, as noted on the schematic.
What will a pot do to the sound?
There's at least two ways to find out.
One involves a schematic, another involves a pot.
Pete, sometimes I have to read your posts 2 or 3 times to understand what you are talking about.
But then sometimes you are crystal-clear with laser precision, haha! :icon_mrgreen:
hint
http://www.diystompboxes.com/pedals/gusFuzzFace.gif
Quote from: petemoore on September 30, 2008, 06:09:40 AM
There's at least two ways to find out.
One involves a schematic, another involves a pot.
:icon_lol: :icon_lol: :icon_lol: