Print Page - Phase 100 > 90 > 45, one box for all with a three way switch?

Title: Phase 100 > 90 > 45, one box for all with a three way switch?
Post by: seibertdr on November 27, 2008, 12:58:20 AM

Hi All,

I was looking at building a Phase 100 but I would also like to be able to switch between the different phase modes. I did a search but only found mods for the phase 90. Would putting in a three way switch and some other components do the trick?

Thank you,

Don

Title: Re: Phase 100 > 90 > 45, one box for all with a three way switch?
Post by: Sir H C on November 28, 2008, 06:12:13 PM

The phase 100 uses a different method than the phase 90 with LDR/LED units as opposed to FETs in the 90 (think the 45 is also FETs but not sure). That would be a lot of changing for 90/100 but I think 90/45 is done (look at the build your own clone site, I think they make mention of it).

Title: Re: Phase 100 > 90 > 45, one box for all with a three way switch?
Post by: frequencycentral on November 28, 2008, 07:07:22 PM

http://www.geofex.com/ >>> FX Projects >>> Phase 90/180

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: seibertdr on November 27, 2008, 12:58:20 AM