Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: dellamorte on January 29, 2009, 08:15:11 PM

Title: Could someone look over my stripboard layout for a fender elite preamp?
Post by: dellamorte on January 29, 2009, 08:15:11 PM
(http://farm4.static.flickr.com/3445/3235389491_0fcbb6aba6_b.jpg)
always good to get a 2nd opinion :)
thanks in advance!
Title: Re: Could someone look over my stripboard layout for a fender elite preamp?
Post by: guilds100 on January 29, 2009, 08:40:25 PM
C1 and R1 arent hooked to ground
Title: Re: Could someone look over my stripboard layout for a fender elite preamp?
Post by: dellamorte on January 29, 2009, 09:46:20 PM
Updated !
Thanks!
(http://farm4.static.flickr.com/3421/3238169642_7fe72595df_o.jpg)
Title: Re: Could someone look over my stripboard layout for a fender elite preamp?
Post by: Cliff Schecht on January 30, 2009, 12:04:59 AM
I never really got the whole doing diagrams before building with perfboard. I just throw everything down in a way that usually resembles the schematic. Kind of a general rule in which I only stray from if the layout is something with a lot of running wires (like if you're doing a microprocessor perfboard build).
Title: Re: Could someone look over my stripboard layout for a fender elite preamp?
Post by: dellamorte on January 30, 2009, 12:31:24 AM
well i really put it up here for 2 reasons:
1. to have someone else check and see if there can be improvements can be made ( noise, space, ect)
2. and to try to share something although small and give back to the community that has given me  so much :)
ill try it out tonight and see if it works
Title: Re: Could someone look over my stripboard layout for a fender elite preamp?
Post by: dellamorte on January 30, 2009, 05:22:27 AM
updated again :)
(http://farm4.static.flickr.com/3478/3237974559_b0fd966b36_o.jpg)
tried to make it a bit smaller
can anyone see any mistakes?
Text only | Text with Images