Print Page - Rebote 2.5 question.

Title: Rebote 2.5 question.
Post by: kawayanstrat on April 13, 2009, 03:15:05 PM

How can i make the delayed sound brighter?

I've noticed 2 .1uF caps on pin 7 and 8 to ground,what are their functions?
Will changing the values of the caps affect the sound?

Thanks in advance! :)

Title: Re: Rebote 2.5 question.
Post by: kawayanstrat on April 15, 2009, 06:04:44 PM

No replies? :-[

Title: Re: Rebote 2.5 question.
Post by: MohiZ on April 16, 2009, 03:28:58 AM

I'm not an expert, but do you see the 12k resistors followed by .01 caps to ground? There are several of them in the lower right section of the layout (I'm looking at the Tonepad file). They are low pass filters that affect the delayed sound only. My opinion would be to decrease those caps. Maybe try 2n2 caps instead.

Title: Re: Rebote 2.5 question.
Post by: kawayanstrat on April 16, 2009, 02:58:40 PM

Quote from: MohiZ on April 16, 2009, 03:28:58 AM
I'm not an expert, but do you see the 12k resistors followed by .01 caps to ground? There are several of them in the lower right section of the layout (I'm looking at the Tonepad file). They are low pass filters that affect the delayed sound only. My opinion would be to decrease those caps. Maybe try 2n2 caps instead.

I've seen them,there are three. Should i change all of them or just one?

Cheers!

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: kawayanstrat on April 13, 2009, 03:15:05 PM