Print Page - Overall Output addition to layout.

Title: Overall Output addition to layout.
Post by: guyswan on February 15, 2011, 06:39:30 PM

hey
i just finished building this pedal ( http://2.bp.blogspot.com/_y7gcfRKQFgA/TOUFyIJfz1I/AAAAAAAAASQ/aNQCbktuBAk/s1600/Lovepedal+COT50+-+IvIark.png ) and i was wondering if i could add a pot in the layout to control the overall output volume of the pedal ?

thanks in advance for your help. :)

Title: Re: Overall Output addition to layout.
Post by: tg509 on February 15, 2011, 08:55:47 PM

Yep, use a 100k audio taper pot,
connect lug 3 of the pot to the output of the board,
connect lug 1 of the pot to ground
connect lug 2 of the pot to your output.
Voilà!

Title: Re: Overall Output addition to layout.
Post by: guyswan on February 15, 2011, 09:27:50 PM

when out say output for lug 2, is that the output on the switch or the output jack, thanks

Title: Re: Overall Output addition to layout.
Post by: blooze_man on February 15, 2011, 10:02:32 PM

The switch.

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: guyswan on February 15, 2011, 06:39:30 PM