I have a few res and caps i cant seem to find, so was wondering if its possible to substitute them with something else.
Caps
20pf
30nf
5nf
Res
2M
They are for the vero layout Boogey (Harald Sabro Bolstad)
Generally nearest preferred values should be good enough in most cases (but if you must have exact values, then you can get very close with a couple of preferred values...)
Caps
20pf use 18p or 22p (or put 2x 10p caps in parallel)
30nf use 27n or 33n (or put 2.7n or 3.3n in parallel with a 27n)
5nf use 4.7n (or put 270p or 33p 4.7 in parallel with a 4.7n)
Res
2M use 1.8M or 2.2M (or put a 1.8M and a 220k in series)
david
Caps
20pf --- 22pf
30nf --- 33nf (333)
5nf --- 4.7nf (472)
Res
2M --- 2.2 M or 2-1M in series
Great thanks. Wasnt sure if you could just substitute them or not.