Print Page - Crybaby PCB dimensions for Eagle

Title: Crybaby PCB dimensions for Eagle
Post by: Aleksi on July 15, 2011, 06:00:24 AM

Hello everyone,

I'm trying to find Eagle layout files for a Crybaby PCB. Mainly I'd like to know the exact positions of the mounting holes along with the PCB size. So basically even a picture with this information would do. And yes, I'm planning to roll my own wah into a crybaby shell.

BR,
Aleksi

Title: Re: Crybaby PCB dimensions for Eagle
Post by: R.G. on July 15, 2011, 10:04:10 AM

I had to measure the positions of the holes for making UVICS. I'll post what I measured on my wah shell over in the UVICS thread.

As noted, wah shells vary, so you will want to leave room around the hole locations for adapting it to your shell.

Title: Re: Crybaby PCB dimensions for Eagle
Post by: R.G. on July 15, 2011, 02:28:36 PM

OK, it's up at http://www.geofex.com (http://www.geofex.com)

Title: Re: Crybaby PCB dimensions for Eagle
Post by: Aleksi on July 18, 2011, 12:50:17 AM

Thanks R.G., much appreciated!

BR,
Aleksi

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Aleksi on July 15, 2011, 06:00:24 AM