Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: caress on July 21, 2011, 09:32:52 AM

Title: anyone have an eagle part file for a 3P4T rotary switch?
Post by: caress on July 21, 2011, 09:32:52 AM
PCB mount, that is.
i'd just rather not go through the hassle of making the part if someone has it.   :P
Title: Re: anyone have an eagle part file for a 3P4T rotary switch?
Post by: caress on July 22, 2011, 03:21:52 AM
ttt
Title: Re: anyone have an eagle part file for a 3P4T rotary switch?
Post by: caress on July 22, 2011, 06:29:59 PM
one last bump
Title: Re: anyone have an eagle part file for a 3P4T rotary switch?
Post by: bean on July 22, 2011, 07:30:41 PM
Yes, but I will need to email it.
Title: Re: anyone have an eagle part file for a 3P4T rotary switch?
Post by: caress on July 22, 2011, 08:52:08 PM
 :D :D :D
pm'd
Title: Re: anyone have an eagle part file for a 3P4T rotary switch?
Post by: bean on July 22, 2011, 10:20:34 PM
Done.
Title: Re: anyone have an eagle part file for a 3P4T rotary switch?
Post by: feedthemule on April 01, 2013, 01:15:40 PM
Any chance you could share that one again?
Title: Re: anyone have an eagle part file for a 3P4T rotary switch?
Post by: armdnrdy on April 01, 2013, 01:32:37 PM
You should have it in the stock library.

Look for CK103X in the Switch.lbr

The package is for a CK 3pole, 4 position rotary switch. The Alpha Taiwan and all of the knockoffs will work with this layout.
Text only | Text with Images