Print Page - BD3201 Access Internal Programs

Title: BD3201 Access Internal Programs
Post by: seedlings on March 20, 2012, 03:54:41 PM

I posted this thread a couple of days ago:
http://www.diystompboxes.com/smfforum/index.php?topic=96641.0

Will one of these work the BD-3201 to select other internal programs? http://www.alliedelec.com/search/productdetail.aspx?SKU=70152993

Thanks,
Un-digital CHAD

Title: Re: BD3201 Access Internal Programs
Post by: Govmnt_Lacky on March 20, 2012, 04:14:04 PM

The data sheet kind of follows the same route as the FV1 chips.

In that case, you will need a hex encoder instead of grey code :)

Title: Re: BD3201 Access Internal Programs
Post by: seedlings on March 21, 2012, 11:17:36 AM

Quote from: Govmnt_Lacky on March 20, 2012, 04:14:04 PM
The data sheet kind of follows the same route as the FV1 chips.

In that case, you will need a hex encoder instead of grey code :)

Forgive my ignorance in digital, but could you link to one for sale? That's the part number from
http://www.outersunsetters.com/femtoverb.gif

CHAD

Title: Re: BD3201 Access Internal Programs
Post by: Govmnt_Lacky on March 21, 2012, 11:27:15 AM

Quote from: seedlings on March 21, 2012, 11:17:36 AM
Forgive my ignorance in digital, but could you link to one for sale?

http://www.mouser.com/ProductDetail/Lorlin/BCK1008/?qs=sGAEpiMZZMvNbjZ2WlReYgj%2fdCDedi0B0L2H4FNE8j4%3d

I have used this exact switch for my FV-1 builds. BEWARE that they DO NOT respond well to large amounts of heat!!! Be sure to solder on the lowest possible setting to get your solder to flow AND don't leave the heat on the contacts for very long.

Title: Re: BD3201 Access Internal Programs
Post by: seedlings on March 21, 2012, 12:09:33 PM

Thank you GL!
CHAD

DIYstompboxes.com

DIY Stompboxes => Digital & DSP => Topic started by: seedlings on March 20, 2012, 03:54:41 PM