Print Page - Fairfield Barbershop OD LOUD switch popping ?

Title: Fairfield Barbershop OD LOUD switch popping ?
Post by: HOTTUBES on September 01, 2014, 02:53:34 AM

More or less a new Fairfield Barbershop OD 958 pops super loud when you cycle the stomp switch ??
The switch seems to check out fine , I don't have a schematic of this circuit , so i'm going to assume it has a pulldown resistor ??
I opened up the pedal and did some basic visual inspections as well , but nothing much to see ...

Any other suggestions would be much appreciated !!

Thank You !!

Title: Re: Fairfield Barbershop OD LOUD switch popping ?
Post by: GoranP on September 01, 2014, 06:15:59 AM

it does, according to this schem
http://2.bp.blogspot.com/-XcQxu0SQ_a4/T_YMCWIW7BI/AAAAAAAABqw/2q3KFrUyFa4/s1600/Fair2.png

Title: Re: Fairfield Barbershop OD LOUD switch popping ?
Post by: knutolai on September 01, 2014, 06:16:59 AM

You can find the schematic over at freestompboxes. It does not seem to have a pulldown on the output.

Title: Re: Fairfield Barbershop OD LOUD switch popping ?
Post by: anchovie on September 01, 2014, 06:23:53 AM

Measure for DC on the audio path switch pins.

Title: Re: Fairfield Barbershop OD LOUD switch popping ?
Post by: knutolai on September 01, 2014, 11:52:49 AM

Not to sidetrack the thread, but why cant we say the name of the other forum? I got '...' -ed out

Title: Re: Fairfield Barbershop OD LOUD switch popping ?
Post by: thelonious on September 01, 2014, 01:28:37 PM

Ancient disagreement over whose schematics can be posted, how much intellectual property ought to be respected, etc., etc.

Title: Re: Fairfield Barbershop OD LOUD switch popping ?
Post by: HOTTUBES on September 01, 2014, 01:44:51 PM

Thanks guys for the schematic link , that should help me out lots !!
I'l report my findings asap ...

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: HOTTUBES on September 01, 2014, 02:53:34 AM