Print Page - Building a Paul C TIM

Title: Building a Paul C TIM
Post by: thecakeguru on April 27, 2016, 02:57:14 PM

Hey. New to pedal building. Built a signa drive. Now Im building a Paul C Tim from tagboardeffects. Question, I got it finished minus the boost switch and diode switch. All works, but the treble pot still filters off my highs in the full on position, and sounds very muffled if I start to turn it down, not at all how it should work. Any Ideas?

Title: Re: Building a Paul C TIM
Post by: george on May 10, 2016, 10:33:40 PM

schematic?

Title: Re: Building a Paul C TIM
Post by: nocentelli on May 11, 2016, 12:49:23 AM

Check the tone cap is definitely 10n not 100n

Title: Re: Building a Paul C TIM
Post by: Ben Lyman on May 11, 2016, 03:03:48 AM

Here's the link. This should help the helpers ;)

http://1.bp.blogspot.com/-pr7Up07eVs4/UtauuzsDYrI/AAAAAAAAF7U/8nbvCtK3OA4/s1600/Paul+Cochrane+Tim.png

Also, some pics of your build to accompany this link might speed things along.
Good luck! :)

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: thecakeguru on April 27, 2016, 02:57:14 PM