Print Page - sd-1 mod problem

Title: sd-1 mod problem
Post by: Nick R on July 11, 2016, 10:36:49 PM

Hi I was removing c3 on my Boss SD-1 and I accidently removed the solder pad closest to the edge of the board I think it connects to r6 but its hard to tell they glued it good in that area does anyone know an easy fix for this thanks ?

Title: Re: sd-1 mod problem
Post by: Hatredman on July 13, 2016, 05:33:28 PM

Isso aqui ajuda?

http://www.hobby-hour.com/electronics/s/sd1-super-overdrive.php

Sent from my iPoor using Tapatalk - now Free because I'm poor

Title: Re: sd-1 mod problem
Post by: Nick R on July 13, 2016, 06:28:27 PM

Thanks Hateredman I'll just run a short led over to r6 and that should fix it now on to the diodes.

Title: Re: sd-1 mod problem
Post by: Hatredman on July 17, 2016, 01:27:58 AM

Sorry for the ansewer in portuguese. It was late at night and I was almost asleep, thinking I was on another forum.

Sent from my iPoor using Tapatalk - now Free because I'm poor

Title: Re: sd-1 mod problem
Post by: Nick R on July 17, 2016, 01:24:00 PM

No problem I got the pedal fixed and thanks again for your help now I'm thinking of putting small pf caps across the diodes to smooth out the clipping what do you think?

DIYstompboxes.com

Projects => IC-based Overdrive => Topic started by: Nick R on July 11, 2016, 10:36:49 PM