Hey everyone
First post here for debugging help...
I've only built about 5 pedals so far, first time i can't figure out a problem.
Aion Titan- OCD Clone
https://aionelectronics.com/wp-content/uploads/2015/08/aion-titan-ocd-documentation.pdf
jumpered the pedal for 18V using on board charge pump from standard 9v adapter
The pedal works, but output is very low, i need the gain and volume cranked to the max to get a noticeable overdrive and output volume is still low.
also, the the Diode clipping switch doesn't seem to affect the tone at all.
the circuit had a misprint that rendered the Tone pot inactive, but I've already corrected this after reading about it on this forum
IC1
1: 7.5
2: 7.5
3: 7.5
4: 0
5: 7.5
6: 7.5
7: 7.5
8: 15.16
IC2
1: 9
2: 4.2
3: 0
4: 0.16
5: 0.34
6: 4.9
7: 6.8
8: 9
thanks for your help!