First vero board build i ever did many years ago,was asked to do another one.The only layout i could find was this one http://diy-layout.com/23 (http://diy-layout.com/23).This is not the one i used many years ago.Went ahead a built it ,sounds great but pots work backwards ie.turning them clockwise vol / gain decreases turn them anti clockwise vol / gain increases which is the opposite from normal operation.Useing this wiring is that how they are mean't to work,if so how would i wire them for normal operation.
Reverse the wiring on the "3" and "1" lugs of each pot. (The wires that go to the 3 lug should go to the 1 lug and vice versa, etc).
Did that,pots now working as they should but only in the last quarter turn.Guess i need to try Lin (B) pots.