Print Page - "Arachnid 8x8" FV1 based effect

Title: "Arachnid 8x8" FV1 based effect
Post by: dathey on June 11, 2019, 11:51:29 PM

Now for something totally different...my first (working) FV-1 based build.

Weighing in at 275g, with dims of 1.5"x2.5"x3.5": I call it, the 'Arachnid 8x8'.

Here's the spec's:

• PedalPCB Arachnid multifx platform
• PedalSync true bypass module
• 256k custom memory expansion module, to support up to 64 - Spin fv1-based patches.
• Battery powered with internal 9v LiPo battery (~55ma current draw)
• Custom fab'd enclosure via your's truly.

Memory expansion module utilizes 8 - 24lc32a eeproms, individually selected via the dipswitch.

My original intention was to use it, as an onboard dsp for acoustic guitar, but not so sure now.

Enjoy!

(https://i.postimg.cc/ppYndh19/IMG-3239.jpg) (https://postimg.cc/ppYndh19)

Title: Re: "Arachnid 8x8" FV1 based effect
Post by: patrick398 on June 12, 2019, 07:29:54 AM

Very nice! Love that finish! Is it textured powder coat?

Title: Re: "Arachnid 8x8" FV1 based effect
Post by: bluebunny on June 12, 2019, 09:34:17 AM

Looks like tolex! (I think I can see a seam at the front edges.)

Title: Re: "Arachnid 8x8" FV1 based effect
Post by: dathey on June 23, 2019, 07:32:51 PM

Nope, just the aluminum chassis panel from an old hp counter.

Gut shot attached
(https://i.postimg.cc/kBpfSphn/C6-F6-C46-B-3-AB5-46-B4-8-D49-E324949-C6-ACD.jpg) (https://postimg.cc/kBpfSphn)

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Pictures => Topic started by: dathey on June 11, 2019, 11:51:29 PM