here is the schematic
(https://i.postimg.cc/zLNKw5zg/LM3886.png) (https://postimg.cc/zLNKw5zg)
and here is the vero. not useing the mute on pin8
ok fixed the 2200uf and made board for 18v bipolar.
will it be ok know
Thanks
(https://i.postimg.cc/7fJBBqyt/bob-Amp.png) (https://postimg.cc/7fJBBqyt)
Shouldn't the 220u on the vero be 2200u instead according to the schematic ?
Looks good to me otherwise.
yes, Thanks
I don't think it will work as vero-ed. the circuit shown is for bipolar supply, V+/ 0V/ V-, you only show 18V. there is a circuit shown in the datasheet for single ended supply [V+/ 0V] but it's more complicated.