Total nube, here and I could use some help, please. I just got done with my Aion Vector kit and it doesn't work.
- The LED lights with the battery, but there is no sound
- The LED does not light up when I plug it into an 9-volt power supply
- There is no volume in bypass mode in either case
Does this set of symptoms suggest an easy fix? I don't have a multimeter and am not technical.
Thanks in advance for your help on this.
(https://i.postimg.cc/RNt4zf8m/vector.jpg) (https://postimg.cc/RNt4zf8m)
If you are not getting bypass signal, then it has to be the jacks, the switch or the wiring in between. What I can see of your soldering looks ok. I suspect the switch, just because I know from experience that it doesn't take much extra heat from soldering to break them. To check the switch properly though you will need a multimeter, or you will need to make some sort of continuity checker (usually a battery a few wires and a light (LED and resistor) will do).