Print Page - Dead end FX PLL ONE - Drone Swap Switch question

Title: Dead end FX PLL ONE - Drone Swap Switch question
Post by: elbenoly on November 25, 2020, 04:05:09 PM

Hi all!

Question, hopefully I didn't miss something obvious somewhere.
I'm trying to figure out how to hook up the drone swap switch for the Dead End FX PLL One. I need to wire up a 3PDT foot switch to it, but I'm not sure what the mapping is. I only need 6 of the 9 lugs, would it just be 1 through 6? Thank for any help!

(https://i.postimg.cc/tZM3X8wC/pllone.jpg) (https://postimg.cc/tZM3X8wC)

Title: Re: Dead end FX PLL ONE - Drone Swap Switch question
Post by: digi2t on November 25, 2020, 06:46:10 PM

Only 6 lugs required. Or, use a DPDT. Otherwise, can't connet whatcha ain't got. :icon_wink:

Title: Re: Dead end FX PLL ONE - Drone Swap Switch question
Post by: elbenoly on November 26, 2020, 10:52:52 PM

Thanks! Love your stuff BTW, I have a Laika and a String Ringer on my desk for when I finish this one.

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: elbenoly on November 25, 2020, 04:05:09 PM