DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Carlinb17 on February 28, 2021, 06:08:29 PM

Title: Pignose... minus the nose
Post by: Carlinb17 on February 28, 2021, 06:08:29 PM
Howdy everyone, I picked up an older pignose 7-100 amp. The potentiometer had been removed and there are a Bunch of loose wires inside.  I ordered the 10k on/off pot for it but I'm not able to locate any sort of picture or wiring diagram for the switch. Didn't know if anyone could shoot me one or post one.

Thanks
Title: Re: Pignose... minus the nose
Post by: iainpunk on February 28, 2021, 06:53:07 PM
the switch is in series with the 9v power line
(https://slowbean.net/wp-content/uploads/2019/01/pignose_7-100_schematic.gif)
its literally the 2nd hit on google,

cheers, Iain
Title: Re: Pignose... minus the nose
Post by: Carlinb17 on February 28, 2021, 06:56:05 PM
Thanks, to you and the google
Title: Re: Pignose... minus the nose
Post by: iainpunk on February 28, 2021, 07:06:43 PM
keep in mind that its a Pos-GND, PNP circuit.

cheers