DIYstompboxes.com

Projects => Beginner Project => Topic started by: KevinSTP on December 22, 2003, 02:22:23 AM

Title: Beginners Tip
Post by: KevinSTP on December 22, 2003, 02:22:23 AM
While modding a pedal I realized that none of the schematics I found exactly matched my circut board and my board had no numbers for the caps or resistors.So I took a black Sharpie and marked the ground trace and all parts that referenced to ground.Using that and the numbered schem. that was the closest match I was able to number my schem. and make some sense of what people were refering to when trying to help me.A little logical detective work goes a long way.