DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: cove on June 13, 2004, 12:09:13 PM

Title: bypass switching and battery drain
Post by: cove on June 13, 2004, 12:09:13 PM
with general guitar gadgets bypass switching...
http://www.generalguitargadgets.com/v2/diagrams/mixer_lo.gif
will there be battery drain if i leave the input cord always plugged in?

just another example
http://www.generalguitargadgets.com/v2/diagrams/bmagic_lo.gif

with the bmagic bypass if i dont leave the effect on but leave the input plugged in will there be drain...?

thanks
Title: yrd
Post by: petemoore on June 13, 2004, 12:12:25 PM
Yes, until the battery is disconnected the current will flow.
Title: bypass switching and battery drain
Post by: SoundTech on June 13, 2004, 12:28:56 PM
The thing about true bypass wiring is that it doesn't really turn the effect on and off, it just takes the inputs and outputs and connects them to each other, or to the effect.  The effect is always on.  The only way to turn the effect off is to kill the power to it.  In the mini mixer example, if there is NO power supply connected to it, and it's just running off the battery, then removing the cable plug from the output jack will disconnect the ground from the battery to the circuit, and will stop the flow of current.  In the Blue Magic example (again assuming NO power supply), removing the cable plug from the input jack will disconnect battery ground.  In both cases, they are using a stereo jack to make a ground connection to the circuit.