Print Page - how to layout a project box?

Title: how to layout a project box?
Post by: fatt-one on November 28, 2004, 11:51:37 PM

Hi All,
I'm new here, I have built a fuzz face circut and was curious to know if there are any sites that show you how to drill out a project box,(1590bb) is the box I have 2 controls,stomp switch.any ideas?
Thank-you
Chris

Title: how to layout a project box?
Post by: swal on November 28, 2004, 11:53:34 PM

http://www.geofex.com/FX_images/1590bb.gif

Title: how to layout a project box?
Post by: fatt-one on November 29, 2004, 12:16:51 AM

Thanks Swal!!!
If I'm seeing this right you cut out the template, lay it out over the box and mark it up to be drilled?Thanks so much for the quick replie!!!!!!
thank-you
Chris

Title: how to layout a project box?
Post by: swal on November 29, 2004, 12:20:57 AM

ur right tape drill and ur done! perfect looking pedal! thank rg keen

Title: how to layout a project box?
Post by: fatt-one on November 29, 2004, 12:23:27 AM

Thank-you R.G.!
Chris

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: fatt-one on November 28, 2004, 11:51:37 PM