Print Page - BOSS OD-2 mod

Title: BOSS OD-2 mod
Post by: MudSkipper on February 21, 2005, 10:43:04 AM

Hi, everyone. This is my first post here. :)

I just tried my hands with adding more bass to my BOSS OD-2. All went well with replace with replacing 3 caps and the pedal now has a better bass response. But in the process, it seems to have lost some of the output volume (and maybe a touch of available gain but not really sure on that). Would someone make a couple of suggestions to get the volume back up? Below is a link to the schematic. What I did was to replace C1, C31 and C5 with bigger value caps (.1uF).

OD-2 Link (http://www.freeinfosociety.com/electronics/schematics/bossod2.htm)

Title: BOSS OD-2 mod
Post by: wampcat1 on May 23, 2005, 02:32:13 PM

Changing c35 to a .22uf will get you more bass without a volume drop, or distortion drop.

Take care,
Brian

Title: BOSS OD-2 mod
Post by: MudSkipper on May 23, 2005, 03:30:32 PM

Thanks, Brian!

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: MudSkipper on February 21, 2005, 10:43:04 AM