hey guys,
I'm sure lots of you could come up with a better layout, but here she is:
(http://i7.photobucket.com/albums/y271/tennisdude/Layoutcopy.jpg)
(http://i7.photobucket.com/albums/y271/tennisdude/labelledschematiccopy.jpg)
enjoy
John
please correct me if there are any mistakes!
cool!
I also did a Layout for the opamp....
(http://i13.photobucket.com/albums/a300/mr_sevs/DiscOpamp.jpg)
It has a Footprint that should allow you to easilly socket it or soldering it to a dip 8 footprint...It has 5 Pins that are spaced the same way as the pins on a real opamp with the unused pins missing.....
The PCB is 1.3in x 1.275 in and uses either 2N5088/5087 or BC550/560....
Cheers
Nice designs on the PCBs. Can you both post the 1:1 artwork for self-etchers?
Thanks!