Steve Conner at the revamped Ampage posted this: http://www.profusionplc.com/cgi-bin/gex/pcatdtl?ipartno=AL3201-RVB
Thought others would find it of interest.
arrgh... read this half an hour too late...
in the meantime...
while waiting for the "Spins",
I found a new challenge with those spare 3-chip sets:
making up a "daughter"-chip on a DIP-14 footprint carrier:
the 3 chips on 3 tiny sandwich-PCBs mounted vertically;
to be treated like a "normal" drop-in verb-IC:
pins 1/2: ana-in L
3/4: ana-in R
5: V+
6/7/8/9 encoder
10: GND
11/12: ana-out R
13/14: ana-out L
about half an inch height...
nice challenge - single sided.
:icon_biggrin:
8 to 14 ana-out
that last line needed to deleted...
but anyway: it`ll gonna be a DIP-16, due to the quartz size...
those 2 extra pins will outboard the crystal to the main board,
and/or enables the chance for an external clock :icon_wink:
Very cool! 8)