Anyone know where I can get small MXR style knobs like Mr Vex uses? I can find the big MXR ones but I'm after the small versions.
I'm based in the UK.
Thanks
I think Mr. Vex gets most of his knob custom made.
Andrew
black fluted? (http://www.smallbearelec.com/Detail.bok?no=104)
ive got some very small black fluted ones, SIMILAR to Vex's, but sorta bigger...i get them at electronic stores.
if i find them online, ill post it...
and the older ones with the pointer are similar to the Davies ones that Mouser has
The black fluted one above looks similar to the ones I have, Mouser Part. No. 45KN013. They are 0.94" in diameter (24mm). There is also the bigger version, 1.32" (34mm), Mouser Part No. 45KN014. These are made by Eagle Plastic Devices (EPD).
Quote from: ubersam on December 13, 2006, 07:41:39 PM
The black fluted one above looks similar to the ones I have, Mouser Part. No. 45KN013. They are 0.94" in diameter (24mm). There is also the bigger version, 1.32" (34mm), Mouser Part No. 45KN014. These are made by Eagle Plastic Devices (EPD).
that be them! :)
naw, mine are custom-made and only .75" in diameter.
Quote from: zachary vex on December 14, 2006, 02:41:29 AM
naw, mine are custom-made and only .75" in diameter.
Jameco sells .75" too. :)
0.75" (19mm)? you can also get similar ones here (http://www.musikding.de/product_info.php?cPath=36_97&products_id=937) in germany. :)
FcKw
i didnt agree to those being the ones he uses, i agreed that those are the ones I use. ;D
Quote from: markm on December 14, 2006, 07:21:45 AM
Quote from: zachary vex on December 14, 2006, 02:41:29 AM
naw, mine are custom-made and only .75" in diameter.
Jameco sells .75" too. :)
Do you have the part number for those in Jameco??, i couldnt find it.
Thanks
Quote from: handwire on December 14, 2006, 01:22:12 PM
Quote from: markm on December 14, 2006, 07:21:45 AM
Quote from: zachary vex on December 14, 2006, 02:41:29 AM
naw, mine are custom-made and only .75" in diameter.
Jameco sells .75" too. :)
Do you have the part number for those in Jameco??, i couldnt find it.
Thanks
Sure do.
Jameco part # 104176CG
I believe the fluted knobs that Effects Connection sells are the small variety. About .75", I think.
http://www.effectsconnection.com/oscommerce/index.php?cPath=27&osCsid=126c5ff55538feaa5bf334a2c10f80ae
oh, those. yeah, those i use on my Taiwan-made products and a few of the US products and they're pretty readily available. i thought he meant the ones on the hand-painted fuzz factory, which are custom-made for me.
(http://zvex.com/website/mods_files/FFknob.jpg)
on the jonny octave, too, right?
Thanks for the replies. I've been looking for knobs like on my Vex Fuzz Factory. I'd seen the Small Bear ones but it didn't have the dimensions. I'll follow up on the new leads.
Thanks.