DIYstompboxes.com

Projects => Beginner Project => Topic started by: Zayden on March 30, 2007, 11:14:53 AM

Title: led indicator
Post by: Zayden on March 30, 2007, 11:14:53 AM
hi,
i've made a classic muff, it sounds great, but i need a led indicator, how do i do it? i put a led and tried every combination no the switch (6 pin stomp switch), and i tried one end to the battery plus and the other on the switch, that way it works fine, but when i plug the input it only changes the strength of the light, but upside down, when it works it's mid-light, when the pedal is off, the led is in full power.
what can i do?
Title: Re: led indicator
Post by: aron on March 30, 2007, 01:09:15 PM
6 pin stomp switch so DPDT? then the FAQ is your friend:

http://www.diystompboxes.com/wiki/index.php?title=DIY_FAQ

Search for true bypass and switching.

Aron
Title: Re: led indicator
Post by: 12milluz on July 16, 2007, 11:08:11 PM
You could also try using the 3PDT switch instead.
Title: Re: led indicator
Post by: CGDARK on July 17, 2007, 12:13:58 AM
Check this:

http://www.generalguitargadgets.com/index.php?option=com_content&task=view&id=33&Itemid=27

CG