I tried searching in the layout gallery fot this millenium, but i didnt find anything. Is there any layout for this circuit that lets possible a led and also a ground connection to the FX input , with a dpdt?? What else can you do in this cases, except using a 3pdt, and not using a led .
Thanks
While there is a lot of information what gets passed around here, it sometimes helps to go to the original source.
You can read all of the Millenium bypass info at GEO, http://www.geofex.com (http://www.geofex.com) . This includes how to extend it to grounding the input of an effect, as well as many more things.
Quote from: R.G. on April 13, 2007, 02:03:48 PM
While there is a lot of information what gets passed around here, it sometimes helps to go to the original source.
You can read all of the Millenium bypass info at GEO, http://www.geofex.com (http://www.geofex.com) . This includes how to extend it to grounding the input of an effect, as well as many more things.
THanks R.G., i already read the article. I was looking for a layout.
Is this one correct?:
(http://www.pisotones.com/Articulos/imgs/MilleniumPlus.jpg)
correct?
Verify with a schematic :D
There are some more layouts.. let me check a second.
EDIT:
http://aronnelson.com/gallery/TheBigMan-Layouts/mb?full=1 (http://aronnelson.com/gallery/TheBigMan-Layouts/mb?full=1)
(http://www.geofex.com/Article_Folders/Millenium/mill2.jpg)
(http://www.geofex.com/Article_Folders/Millenium/mill2bd.gif)
PS I love 2 hours edit :D
Quote from: QSQCaito on April 15, 2007, 01:52:41 PM
Verify with a schematic :D
There are some more layouts.. let me check a second.
EDIT:
http://aronnelson.com/gallery/TheBigMan-Layouts/mb?full=1 (http://aronnelson.com/gallery/TheBigMan-Layouts/mb?full=1)
(http://www.geofex.com/Article_Folders/Millenium/mill2.jpg)
(http://www.geofex.com/Article_Folders/Millenium/mill2bd.gif)
PS I love 2 hours edit :D
?
Just want to know how is the wiring for the DPDT with the Millenium 2 plus layout above.
Thanks
(http://www.geofex.com/Article_Folders/Mill2extn/mill2pls.gif)
In the schematic with the IC, where goes the ground terminal? And the dpdt wiring is the same as the Milennium2? And is it work well or has an oscilation or something like that?
Thanks
any answer?
QuoteIn the schematic with the IC, where goes the ground terminal?
It connects to all of the ground symbols.
QuoteAnd the dpdt wiring is the same as the Milennium2?
Yes.
QuoteAnd is it work well or has an oscilation or something like that?
It works well.
(http://img476.imageshack.us/img476/1658/89425354rw0.jpg)
Something like that? If its correct how is supposed to ground the FX IN when effect is bypassed?
QuoteSomething like that?
Yes.
Quote
If its correct how is supposed to ground the FX IN when effect is bypassed?
It's not. That's not one of the functions of this version of the Millenium. There's a whole article on those extensions at GEO.
(http://img504.imageshack.us/img504/787/61809401xl7.jpg)
I just want to make a Sans Amp Gt2, with a dpdt and an indicator led, and connect the fx input to ground when effect is bypassed so there is no oscilation.
Thanks for you replies R.G.
OK.
Did you read the seven year old article at GEO "The Millenium Extensions"?
http://geofex.com/Article_Folders/Mill2extn/mil2plus.htm (http://geofex.com/Article_Folders/Mill2extn/mil2plus.htm)
It shows how to do that.
Yes RG, thanks, i already readi it, but im confused with the wiring.
Can you tell me how is the entire wiring of the dpdt and the millennium 2 plus?
Thanks
Please :-\
QuoteCan you tell me how is the entire wiring of the dpdt and the millennium 2 plus to shunt the FX input when the effect is bypassed?
Thanks
i mean, where goes the FX input to the milennium 2 plus?