Text only | Text with Images

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: Easywider on July 09, 2007, 09:53:33 PM

Title: Smallbear Matched PNP Fuzz Face Transistor Questions
Post by: Easywider on July 09, 2007, 09:53:33 PM
Just making sure , The PNP Positive ground GGG resistor layout starts with R2 thru R5 , & Steves values start at R3 . Do I just change Steves R2 to an R3 & go from there ?.... , ( R3 being R6 on the layout ) : http://www.generalguitargadgets.com/index.php?option=com_content&task=view&id=101&Itemid=26#dallas (http://www.generalguitargadgets.com/index.php?option=com_content&task=view&id=101&Itemid=26#dallas) , is this correct ?

Thanks ,

Chris
Title: Re: Smallbear Matched PNP Fuzz Face Transistor Questions
Post by: smallbearelec on July 09, 2007, 10:58:32 PM
Chris--

Compare the GGG schematic with the left-hand side of the Bear Face schem:

http://www.smallbearelec.com/Projects/BearFace/BearFace.htm

and all should be clear.

SD
Text only | Text with Images