Print Page - dc socket wiring

Title: dc socket wiring
Post by: dannyg on July 25, 2007, 05:38:28 PM

Today I bought a few supplies to finish off my first pedal, one being a metal DC socket instead of the platstic ones. There is a difference also in the wiring end, unlike the plastic one, the metal one has 3 lugs. The pedal is positive ground and I'm wondering if anybody could draw me a diagram showing how I should wire it. Thanks.

Title: Re: dc socket wiring
Post by: CGDARK on July 25, 2007, 05:49:27 PM

The plastic one has three lugs too. One is for tip, sleeve and switch.

Check for diagrams at: http://www.generalguitargadgets.com/

CG

Title: Re: dc socket wiring
Post by: dannyg on July 25, 2007, 05:51:20 PM

I was aware that it was the same in it's on right.

Only problem, GGG is down at the moment.

Title: Re: dc socket wiring
Post by: CGDARK on July 25, 2007, 05:57:01 PM

I have just sent you the diagram via email.

CG

Title: Re: dc socket wiring
Post by: dannyg on July 25, 2007, 06:00:15 PM

Would you be able to describe which is which for a metal version with a different style of lug?

Title: Re: dc socket wiring
Post by: CGDARK on July 25, 2007, 06:04:51 PM

Check this and let me know if it is like this one.

http://www.mouser.com/catalog/specsheets/KC-300228.pdf

CG

Title: Re: dc socket wiring
Post by: dannyg on July 25, 2007, 06:06:21 PM

It's not that one, but it is this one...

http://www.maplin.co.uk/Module.aspx?ModuleNo=1407&C=Maplin&U=SearchTop&T=DC%20SOCKET&doy=25m7

Title: Re: dc socket wiring
Post by: CGDARK on July 25, 2007, 06:13:21 PM

Is very difficult to trace the lugs with that photo, but the lug for the tip is easy is the one at the center. I think the one just in front of the tip is the sleeve and the other one is the switch lug. I almost sure that I'm correct. :icon_question:

CG

Title: Re: dc socket wiring
Post by: dannyg on July 25, 2007, 06:15:45 PM

The tip is the one at the top, and then there is one in the middle, and one at the bottom. If that helps.

Title: Re: dc socket wiring
Post by: CGDARK on July 25, 2007, 06:32:00 PM

Sorry, but I didn't explained myself very well (my first language is not english). I said that the tip was the one at the center, what I mean was the one connected to the center pin (the one on top). You are right. The middle one is the sleeve and the other is the switch. Check and let me know.

CG

Title: Re: dc socket wiring
Post by: dannyg on July 26, 2007, 02:03:16 PM

I think you are right there. Could you tell me how to wire it?

Title: Re: dc socket wiring
Post by: dannyg on July 26, 2007, 06:41:31 PM

Anyone?

Title: Re: dc socket wiring
Post by: CGDARK on July 26, 2007, 08:58:18 PM

Quote from: dannyg on July 26, 2007, 02:03:16 PM
I think you are right there. Could you tell me how to wire it?

1=tip
2=sleeve
3=sleeve shunt (switch)

As seen from the bottom:
3------> Connect to to the V+ wire of the battery
2----------> Connect to the +V on the board
1------> Connect to ground on the board

And you are done. This all based of what we determined yesterday about your particular DC jack.

CG 8)

Title: Re: dc socket wiring
Post by: dannyg on July 27, 2007, 10:37:52 AM

Is V+ negative from the battery?

Title: Re: dc socket wiring
Post by: CGDARK on July 27, 2007, 11:06:28 AM

No, is the red wire from the battery snap.

CG

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: dannyg on July 25, 2007, 05:38:28 PM