Print Page - fitting footswitch to 250 clone

Title: fitting footswitch to 250 clone
Post by: axevictim on April 09, 2008, 02:48:55 AM

hi guys im pretty new to the pedal building scene,ive breadboarded a couple of projects so decided to have a go at building the 250 clone on vero board and im pleased to say it turned out great,now the only thing im having trouble with is fitting a DPDT switch.Theres a great vero board diagram of the 250 posted by gaussmarkov on this post which i have used but it doesnt show you how to fit a footswitch unfortunately if anyone could help that would be great thanks.

Title: Re: fitting footswitch to 250 clone
Post by: gaussmarkov on April 09, 2008, 01:23:06 PM

i wonder if the information you need is in the tonepad.com document about off-board wiring? see http://tonepad.com/project.asp?id=35 (http://tonepad.com/project.asp?id=35) and follow the links to the pdf document.

Title: Re: fitting footswitch to 250 clone
Post by: gaussmarkov on April 09, 2008, 01:23:52 PM

... and hey! welcome to the forum! :icon_biggrin:

Title: Re: fitting footswitch to 250 clone
Post by: axevictim on April 13, 2008, 11:19:44 AM

got there in the end thanks very much for your help

Title: Re: fitting footswitch to 250 clone
Post by: gaussmarkov on April 13, 2008, 01:45:41 PM

Quote from: axevictim on April 13, 2008, 11:19:44 AM
got there in the end thanks very much for your help

excellent. :icon_cool:

DIYstompboxes.com

Projects => IC-based Overdrive => Topic started by: axevictim on April 09, 2008, 02:48:55 AM