Print Page - Learning Eagle - Can't find VTL5C3

Title: Learning Eagle - Can't find VTL5C3
Post by: chi_boy on December 28, 2010, 10:39:43 PM

I'm trying to learn Eagle and I'm getting the hang of it, but I can't seem to find a VTL5C3 in the library. I'm using the Gaussmarkov libraries, but I don't see it there or in the regular library. Am I missing it or is it simply not there?

If it's not there, are there place to look for additional libraries online, or would I have to create onr in the library myself?

Thanks for the help.

George

Title: Re: Learning Eagle - Can't find VTL5C3
Post by: soggybag on December 28, 2010, 10:58:02 PM

The GM library doesn't have this part. I think I downloaded another library that does have that part. If I remember I googled until I found something.

I'm still looking for a good 13600, for Eagle.

Title: Re: Learning Eagle - Can't find VTL5C3
Post by: chi_boy on December 28, 2010, 11:19:17 PM

Yeah, Google's not being my friend tonight. Lot's of fog makes it hard to see.

I'll keep trying.

Thanks.

Title: Re: Learning Eagle - Can't find VTL5C3
Post by: diydave on December 29, 2010, 07:22:10 AM

check out this link.
ftp://ftp.cadsoft.de/eagle/userfiles/libraries/optocoupler.lbr

the vtl5c* should be in there.

Title: Re: Learning Eagle - Can't find VTL5C3
Post by: meffcio on December 29, 2010, 07:36:44 AM

Quote from: diydave on December 29, 2010, 07:22:10 AM
check out this link.
ftp://ftp.cadsoft.de/eagle/userfiles/libraries/optocoupler.lbr

the vtl5c* should be in there.

Board doesn't seem to like ftp links, so...
http://tinyurl.com/6g26d2

Title: Re: Learning Eagle - Can't find VTL5C3
Post by: chi_boy on December 29, 2010, 07:51:21 AM

Quote from: diydave on December 29, 2010, 07:22:10 AM
check out this link.
ftp://ftp.cadsoft.de/eagle/userfiles/libraries/optocoupler.lbr

the vtl5c* should be in there.

Took a quick look and I don't see it, but this does help a bunch. There are so many libraries there I wasn't sure what to look for, but searching for "optocoupler" opens up a lot of possibilities. I should be able to find something now. Thanks for the help!

George

Title: Re: Learning Eagle - Can't find VTL5C3
Post by: chi_boy on December 29, 2010, 07:57:05 AM

Quote from: diydave on December 29, 2010, 07:22:10 AM
check out this link.
ftp://ftp.cadsoft.de/eagle/userfiles/libraries/optocoupler.lbr

the vtl5c* should be in there.

I shouldn't do this stuff before work! I'm going to be late!!!

This library has the VTL5C's:

ftp://ftp.cadsoft.de/eagle/userfiles/libraries/optocoupler-2.lbr

Thanks again for the help!!

Cheers,
George

Title: Re: Learning Eagle - Can't find VTL5C3
Post by: meffcio on December 29, 2010, 11:56:11 AM

Quote from: chi_boy on December 29, 2010, 07:57:05 AM
Quote from: diydave on December 29, 2010, 07:22:10 AM
check out this link.
ftp://ftp.cadsoft.de/eagle/userfiles/libraries/optocoupler.lbr

the vtl5c* should be in there.

I shouldn't do this stuff before work! I'm going to be late!!!

This library has the VTL5C's:

ftp://ftp.cadsoft.de/eagle/userfiles/libraries/optocoupler-2.lbr

Thanks again for the help!!

Cheers,
George

ftp://ftp.cadsoft.de/eagle/userfiles/libraries/optocoupler.lbr (ftp://ftp.cadsoft.de/eagle/userfiles/libraries/optocoupler.lbr)

DIYstompboxes.com

DIY Stompboxes => Building your own stompbox => Topic started by: chi_boy on December 28, 2010, 10:39:43 PM