Since I do Not have Strip board, I thought I would try this one.
A few questions though,
What do I connect to Volume Pot #2 ?
What do I connect to Gain Pot #1, #3 ?
Where do I connect the output on the board?
Picture of the Layout below
http://www.aronnelson.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=7179&g2_serialNumber=2
:icon_eek: tiny pic?....
a better picture :D
(http://www.aronnelson.com/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=7178&g2_serialNumber=2)
1 - What do I connect to Volume Pot #2 ? this is yout output - see point #3
2 - What do I connect to Gain Pot #1, #3 ? looks like it contains a small error, gain pot #2 & #1 go to grond (point 4 or 5 or 6), and #3 goes to point 2 on the layout, connected to 4.7k resistor
3 - Where do I connect the output on the board? see #1
enjoy it!!
Ciao
Armando
ahhhhh i can see!... :icon_mrgreen:
Thanks all.............. I don't know why I am still having trouble identifying how the signal flow should go.