ahhh i see...

edit: shouldn't that trim middle row be joined then?

Yeah, different pinouts for trimmers. TL072 should be OK, as I understand it

Quote from: deadastronaut on May 18, 2012, 06:40:59 AM
ahhh i see...

edit: shouldn't that trim middle row be joined then?

Nice catch. Will fix as soon as I have the tine to do it. Guess you're proficient enough with some graphics program to fix it yourself if you can't wait.

nope!..i'll wait till you post the pdf's...then i'll crack on and etch a couple ready for when my bits arrive!!!...

all the rest looks ok to me!...any eagle eyed members see anything else?...

Here ya go.



Layout PDF: http://dl.dropbox.com/u/20165528/Small%20Clone%20-%20Squeeze.pdf
Transfer PDF: http://dl.dropbox.com/u/20165528/Small%20Clone%20-%20Squeeze%20-%20Transfer.pdf

And finally, for any and all to dissect...

DIYLC File: http://dl.dropbox.com/u/20165528/Small%20Clone%20-%20Tonepad%20-%20Squeeze.diy

nice one pelle:  

at what % do you print these...when i export traces/layout pdf's, its always set at 100%..ready to print?

The png's print correctly if I set the dpi to 300. The pdf's I thought were automatically correct. If not I'd count that as a bug in diylc.

I'm on my phone now (parental leave Mondays , on our way to IKEA for lunch) so I can neither check nor correct

I'll look into it when I come home.

no worries i do a test print anyway ok...

edit: looks fine!size wise..

erm, just noticed the 180p no pad...i tried downloading the diylc file..just got text!..

I think you'll have to right click and "save as" and you should be safe.

I've uploaded a corrected version of the transfer to dropbox (same name, use link above).

The problem was a trace that ended before the pad, not the actual pad missing.

cool, cheers pelle, i'll try n get a couple etched today...

I etched before you debugged it, but I could bend the leg of that cap. Got the resistors, sockets and ceramic caps soldered in Still waiting for the 3007s though

cool, yeah i'm waiting on those too.....

thought i'd get my pcb's done n ready...really looking forward to a 'lush' chorus, can't wait!!..

been busy!!!...

Looking good, what's the last one?

thats a dodgy diy sustainer i'm going to experiment with while waiting for my chorus bits....

still waiting on those ic's...hmmmmm...

my patience is being truly tested!...

Quote from: deadastronaut on May 28, 2012, 03:54:20 AM
still waiting on those ic's...hmmmmm...

my patience is being truly tested!...

Yeah, it's not that I don't like the rest of the board, it's just a little boring without that chip

I've been opening the mailbox in anticipation each day for a week now

guess who's bits turned up at last!!!...whooohoooo....

got to fit a humbucker to my crapocaster today, chiseling out body n stuff!...pita but will be much better when done!.....

can't wait to start on the chorus though!....whhhhoooooohoooooo....

Gotta praise the Royal Mail there, our mailman wont show up for another two hours or so.

No luck for me today, though the beads for my next necklace arrived, so I'll have something to do.

ha ha i had that on mine too....beads?.