Phase 45 pin voltages

[lightningfingers]

This thing is not phasing and something very wierd is going on with the FETs. I'm using Tonepads layout.

IC1

pin1 2.01
pin2 3.10
pin3 3.03
pin4 0
pin5 2.06
pin6 3.03
pin7 3.02
pin8 9.07

(erm...they're both labelled IC1)

pin1
pin2 3.33
pin3 5.54
pin4 0
pin5 3.03
pin6 3.1
pin7 3.1
pin8 9.07

pins 2 and 3 look wrong to me but they are connected up okay so I dont see how they can be....

Now for the really wierd part. Both FETs all the pins read 3.04, no matter what FETs are in there. I know you will all jump in and tell me I have a short but i've checked it a hundred times and its all connected right.

Anybody want to have a stab at it?

EDIT: someone pionted out yesterday that I have the wrong value trimmer in there...its a 1M as opposed to the specified 250K, could that be whats causing the problem?

[RDV]

Here's the pin voltages of my functioning Tonepad Phase45:

IC1
1. 3.53
2. 3.52
3. 3.52
4. 0
5. 3.37
6. 3.52
7. 3.52
8. 9.73

IC2
1. 3.53
2. 4.60 - 5.35
3. 4.32 - 5.41
4. 0
5. 3.52
6. 3.53
7. 3.53
8. 9.72

Q1
D. 3.52
S. 3.52
G. 3.52

Q2
D. 1.35
S. 3.52
G. 3.52

Zener Diode Cathode End
3.52

Pins 2 & 3 of IC2 are the oscillator which when working are both constantly changing in voltage. If you're getting a steady voltage there, it's not working. I'd also go get the correct value trimmer to just be sure.

Hope this helps.

RDV

[lightningfingers]

Thanks now I know what voltages to look for. Question, will I still get those voltage oscillations if the FETs arent matched?